International Journal Of Coastal, Offshore And Environmental Engineering(ijcoe)

International Journal Of Coastal, Offshore And Environmental Engineering(ijcoe)

Design of a Mooring System for Floating PV Power Plant

Document Type : Original Research Article

Authors
1 Master of Marine Engineering, Department of Mechanical Engineering, Sharif University of Technology
2 Department of Mechanical Engineering, Sharif University of Technology
3 Rigi street, Chabahar Maritime University, Chabahar, Iran
10.22034/ijcoe.2026.585646.1244
Abstract
Floating solar power plants offer advantages such as higher panel efficiency, reduced evaporation, and no land occupation. A key design challenge is the mooring system, which must withstand wind and current loads while accommodating water level fluctuations of up to 30 meters. In this study, a Steep-S mooring configuration was selected for a 30kW floating solar plant with 63 panels operating in water depths of 70–100 meters. Using OrcaFlex and a Python API for automation, mooring forces were analyzed according to DNVGL guidelines under two limit states: a 50-year extreme condition and a 1-year accidental/operating condition. Results showed that the maximum line tension occurred in the 50-year extreme state, requiring a mooring line diameter of 10.6 mm. The maximum displacement was 24.2 meters in the accidental state at 80 meters depth, aligned with the current direction. These findings provide a practical foundation for the safe and reliable deployment of floating solar systems in deep reservoirs.
Keywords
Subjects


Articles in Press, Accepted Manuscript
Available Online from 22 November 2026