<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Society Of Marine Science and Technology</PublisherName>
				<JournalTitle>International Journal Of Coastal, Offshore And Environmental Engineering(ijcoe)</JournalTitle>
				<Issn>2980-8731</Issn>
				<Volume>1</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2016</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Effect of External Water Flow on Response of Cylindrical Shell Subjected to Under Water Explosion</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1</FirstPage>
			<LastPage>7</LastPage>
			<ELocationID EIdType="pii">149266</ELocationID>
			
<ELocationID EIdType="doi">10.22034/ijcoe.2016.149266</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName></FirstName>
					<LastName>Jalili</LastName>
<Affiliation>PhD Candidate, Mechanical Engineering, Tehran University, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName></FirstName>
					<LastName>Shad</LastName>
<Affiliation>MSc. Student, Coastal Engineering, Qom University, Qom, Iran</Affiliation>

</Author>
<Author>
					<FirstName></FirstName>
					<LastName>Biglarkhani</LastName>
<Affiliation>Orooj Gostar Aria, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2022</Year>
					<Month>05</Month>
					<Day>06</Day>
				</PubDate>
			</History>
		    <Abstract>This article deals with response of cylindrical shell subjected to loading of Under Water Explosion (UNDEX) when water current is introduced to the surrounding environment. Cylindrical shells as one of main basic structural elements in construction of marine and submarine facilities are prone to UNDEX threat. Due to vicissitudes of conducting experiments in this field and also complicated inherent of fluid-solid interaction phenomenon, numerical models can be used as an effective tool for scrutinizing the problem. In this study, a submerged thin walled cylindrical shell and its surrounding water discretized by coupled shell Lagrangian elements and Eulerian cells respectively. Simulations are performed in AUTODYN hydrocode. For better perceiving of phenomenon, studies are done for two various explosive charge stand-off distances. Results show that introduction of flow to water, can tangibly change the symmetrical configuration of flow- less problem. Due to intricate interaction of water flow and explosion bubble, distribution of UNDEX overpressure and impulse is disturbed and this leads to un-symmetric deformation of cylindrical shell. Also amplitudes of deflection are reduced obviously by increasing flow velocity.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">UNDEX</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Cylindrical Shell</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Fluid-Solid Interaction</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Autodyn</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.ijcoe.org/article_149266_a64073d764017e8e7020fa4c350597c4.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Society Of Marine Science and Technology</PublisherName>
				<JournalTitle>International Journal Of Coastal, Offshore And Environmental Engineering(ijcoe)</JournalTitle>
				<Issn>2980-8731</Issn>
				<Volume>1</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2016</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Marine Forecasting Systems in Caspian Sea, Persian Gulf and Oman Sea</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>9</FirstPage>
			<LastPage>12</LastPage>
			<ELocationID EIdType="pii">149267</ELocationID>
			
<ELocationID EIdType="doi">10.22034/ijcoe.2016.149267</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Aliasghar</FirstName>
					<LastName>Golshani</LastName>
<Affiliation>MetOcean Expert, Beta Group Consulting Engineers</Affiliation>

</Author>
<Author>
					<FirstName>Alireza</FirstName>
					<LastName>Vaselali</LastName>
<Affiliation>Head of Design and Technology Department, Beta Group Consulting Engineers</Affiliation>

</Author>
<Author>
					<FirstName>Said</FirstName>
					<LastName>Mazaheri</LastName>
<Affiliation>Research Assistant Professor, Iranian National Institute for Oceanography and Atmospheric Science</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2022</Year>
					<Month>05</Month>
					<Day>06</Day>
				</PubDate>
			</History>
		    <Abstract>There are several global marine forecast systems based on large scale regional data covering Iranian seas which are freely available on their websites. They are also several local marine forecast systems in Iranian waters. This paper performs an inter-comparison among different marine forecasting systems in Iranian seas in order to evaluate the accuracy and difference between them and give a proper ground for further investigation and research in this crucial issue. For this purpose, the results of two forecasting system in several points in the Persian are compared and the reason of differences are investigated. </Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">marine forecast wind wave current Persian Gulf Caspian Sea</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Oman Sea</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.ijcoe.org/article_149267_45f54f62452c495a5ee4fb54c57f0973.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Society Of Marine Science and Technology</PublisherName>
				<JournalTitle>International Journal Of Coastal, Offshore And Environmental Engineering(ijcoe)</JournalTitle>
				<Issn>2980-8731</Issn>
				<Volume>1</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2016</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Cross-Flow Vortex Induced Vibration Fatigue Analysis of Persian South Gas Field Subsea Pipelines Due to Multi-Spanning</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>13</FirstPage>
			<LastPage>18</LastPage>
			<ELocationID EIdType="pii">149268</ELocationID>
			
<ELocationID EIdType="doi">10.22034/ijcoe.2016.149268</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Mahdi</FirstName>
					<LastName>Shabani</LastName>
<Affiliation>M.Sc. student of Petroleum University of technology, department of offshore engineering</Affiliation>

</Author>
<Author>
					<FirstName>Abdolrahim</FirstName>
					<LastName>Taheri</LastName>
<Affiliation>Assistant- Prof. of civil Petroleum University of technology, department of offshore engineering</Affiliation>
<Identifier Source="ORCID">0000-0001-6541-0092</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2022</Year>
					<Month>05</Month>
					<Day>06</Day>
				</PubDate>
			</History>
		    <Abstract>Free-span in subsea pipelines occur at manmade supports, uneven seabed or pipeline crossing. Free spanning may induce pipeline vibration due to vortex shedding which makes pipeline susceptible to some failures such as fatigue, fracture, etc. Free spanning analysis is an important subject because fatigue is the most effective factor in reducing the pipeline design life. Free spanning analysis includes static analysis and dynamic analysis.DNV-RP-F105 suggests a methodology of dynamic analysis for long pipeline with multi-mode responses, but the fatigue analysis method for multi-modes is not detailed. In addition, the fatigue analysis of multi-spanning pipeline is not clear. Based on the methodology of DNV-RP-F105 fatigue life relates to natural frequencies of pipeline, the method of determination of effective natural frequencies still is not clear.In this paper, a fatigue analysis for multi-spanning pipeline in Persian south gas field is performed based on VIV analysis. ABAQUS FE model is developed to obtain the stress distribution and the natural frequency of each vibration mode for spanning pipeline on seabed with three multi-spans, then the fatigue analysis of VIV is carried out for the spanning pipeline based on DNV-RP-F105.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">subsea pipelines</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Fatigue Analysis</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Natural frequency</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">multi spanning</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Vortex Shedding</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.ijcoe.org/article_149268_048b78c6ccd4d9df47d9f3474bbfe6c4.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Society Of Marine Science and Technology</PublisherName>
				<JournalTitle>International Journal Of Coastal, Offshore And Environmental Engineering(ijcoe)</JournalTitle>
				<Issn>2980-8731</Issn>
				<Volume>1</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2016</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Pressure distribution around a near-wall circular cylinder subjected to steady current</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>19</FirstPage>
			<LastPage>26</LastPage>
			<ELocationID EIdType="pii">149269</ELocationID>
			
<ELocationID EIdType="doi">10.22034/ijcoe.2016.149269</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName></FirstName>
					<LastName>Salehi</LastName>
<Affiliation>Ocean Engineering and Technology Research Center, Iranian National Institute for Oceanography and Atmospheric Sciences</Affiliation>

</Author>
<Author>
					<FirstName></FirstName>
					<LastName>Mazaheri</LastName>
<Affiliation>Ocean Engineering and Technology Research Center, Iranian National Institute for Oceanography and Atmospheric Sciences</Affiliation>

</Author>
<Author>
					<FirstName></FirstName>
					<LastName>Kazeminezhad</LastName>
<Affiliation>Ocean Engineering and Technology Research Center, Iranian National Institute for Oceanography and Atmospheric Sciences</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2022</Year>
					<Month>05</Month>
					<Day>06</Day>
				</PubDate>
			</History>
		    <Abstract>Flow around a circular cylinder near plane wall has been simulated using Open source CFD codes of OpenFOAM in different flow regimes (Re=100, 200, 3900) and different gap ratios (G/D= ∞, 1, 0.5, 0.2). Time-averaged pressure coefficients around a circular cylinder computed and compared with each others in different cases. Other features of flow including drag and lift coefficients, Strouhal number, separation angle and stagnation angle are also computed to describe the state of flow better. It has been shown that pressure distribution around the circular cylinder can be utilized to describe the variations in hydrodynamic force coefficients as well as other features of wake flow such as separation and vortex shedding phenomenon near a plane boundary. Plane wall effects on pressure distribution in different flow regimes investigated and it was found that the inception of vortex shedding suppression can be deduced from pressure distribution pattern, through pressure gradient between free-stream-side and wall-side of cylinder. In addition, a rapid increase in the maximum value of positive pressure coefficient can be concluded.</Abstract>
<ArchiveCopySource DocType="pdf">https://www.ijcoe.org/article_149269_4fbcdcb4916848036442240a31883de1.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Society Of Marine Science and Technology</PublisherName>
				<JournalTitle>International Journal Of Coastal, Offshore And Environmental Engineering(ijcoe)</JournalTitle>
				<Issn>2980-8731</Issn>
				<Volume>1</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2016</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Speed Control of Autonomous Underwater Vehicle with Constraints Using Model Predictive Control</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>27</FirstPage>
			<LastPage>33</LastPage>
			<ELocationID EIdType="pii">149270</ELocationID>
			
<ELocationID EIdType="doi">10.22034/ijcoe.2016.149270</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Seyyed Hossein</FirstName>
					<LastName>Ghenaati</LastName>
<Affiliation>Electrical and Computer Department, Yazd University, Yazd, Iran;</Affiliation>

</Author>
<Author>
					<FirstName>Shahram</FirstName>
					<LastName>Aghaei</LastName>
<Affiliation>Assistant Professor, Electrical and Computer Department, Yazd University, Yazd, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2022</Year>
					<Month>05</Month>
					<Day>06</Day>
				</PubDate>
			</History>
		    <Abstract>Nowadays Autonomous Underwater Vehicles (AUVs) are an unavoidable part of marine industries. One of the most important parts of any autonomous vehicle is the control issue to achieve the desired performance. This paper is concerned with speed control of an AUV model respecting the state and control constraints. According to the Newton-Euler method, the 6 DOF kinematic and dynamic models of the AUV are established. A well-defined performance index and constrained finite horizon optimization program in the form of Model Predictive Control (MPC) strategy is proposed to regulate the horizontal speed of AUV to its desired value while the constraints on the states like depth and control signals are considered in finite time horizon optimization program to be satisfied. The main problem for such a situation is the interaction between speed control and depth deviation then quadratic programing technique managed responses to avoid state and control signal constraints. Simulation results show a reliable performance of proposed MPC strategy to control the horizontal speed of AUV while all the constraints on state, control signal and also the variation of the control signal are satisfied.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Autonomous Underwater Vehicle Model Predictive Control Optimization Constraint Satisfaction</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.ijcoe.org/article_149270_7658b664e98cf2b46fca814b9f08da8a.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Society Of Marine Science and Technology</PublisherName>
				<JournalTitle>International Journal Of Coastal, Offshore And Environmental Engineering(ijcoe)</JournalTitle>
				<Issn>2980-8731</Issn>
				<Volume>1</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2016</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Analysis of Band Curvature in Asymmetrical Rolling Process by FEM Method</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>35</FirstPage>
			<LastPage>41</LastPage>
			<ELocationID EIdType="pii">149271</ELocationID>
			
<ELocationID EIdType="doi">10.22034/ijcoe.2016.149271</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Hassan</FirstName>
					<LastName>Sayyaadi</LastName>
<Affiliation>Ph.D, Sharif University of Technology/ Department of Mechanical Engineering</Affiliation>

</Author>
<Author>
					<FirstName>Ramin</FirstName>
					<LastName>Yekta</LastName>
<Affiliation>M.SC Student, Sharif University of Technology/ Department of Mechanical Engineering</Affiliation>

</Author>
<Author>
					<FirstName>Abolfazl</FirstName>
					<LastName>Motekallem</LastName>
<Affiliation>M.SC Student, Sharif University of Technology/ Department of Mechanical Engineering</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2022</Year>
					<Month>05</Month>
					<Day>06</Day>
				</PubDate>
			</History>
		    <Abstract>Today, the rolled products, i.e. sheet, plate and foil is used in marine applications, including platforms, hatch covers, mast, hulls of boats and superstructures on pleasure boats and the bridges and superstructures of passenger ships and merchant ships. In this paper, simulation of asymmetric cold rolling is presented by using explicit analysis procedure. In asymmetric cold rolling, the workpiese if often bent downwards or upwards. A two dimensional explicit dynamic finite element model with adaptive meshing technique has been employed to simulate asymmetrical condition are here due to different roll radii. To validate the simulation, the results of simulation and experiment are compared. Effects of asymmetry due to roll radii ratio and speed ratio mismatch on sheet curvature variations are discussed. Finally, optimum roll speed ratio in various of roll radii ratio could be found to produce flat sheet.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Asymmetrical rolling</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Finite element method</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Radii ratio</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Speed ratio</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Sheet Curvature</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.ijcoe.org/article_149271_7b10bef925e220680ed1fb052e801b59.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
